Distillation is the chemical engineering processes and other facilities used in oil refineries to distills the incoming crude oil, pyrolysis oil and waste oil into useful products such as diesel oil and fuel oils, gasoline or petrol, jet fuel, etc.
Distillation plant works as follows:
1. Pump waste oil into distillation reactor by oil pump.
2. Heat the reactor, and the liquid oil will slowly become oil gas, oil gas will go through catalytic chamber and condenser, then diesel will be cooled out first by controlling the temperature over 150 Celsius degrees.
3.The gasoline will be cooled out when the temperature is below 150 Celsius degrees, the rest of the system is same as pyrolysis system.
Item | Contents | |
Raw material | Waste engine/motor oil Plastic pyrolysis oil Tire pyrolysis oil Lubrication oil | |
Average out-put oil rate | 85%-90% | |
End products | Diesel oil, waste gas, slag | |
Structure form | Horizontal | |
Operating pressure | Constant pressure | |
Heating material | Coal, charcoal, fuel gas, fuel oil | |
Model(Diameter*Length) (mm) | Reactor size | Capacity |
D1500*L3000 | 3 Ton/Day | |
D2000*5000 | 5 Ton/Day | |
D2800*6000 | 10 Ton/Day | |
Material of reactor | Q245R&Q345R boiler plate | Thickness of reactor | 16mm, 18mm | Mode of cooling | Circulating water cooling | Space needed | Length: 30m, Width :10 m at most | Power consumption | Average 15 KW/h |
Name | Usage |
Fuel oil | Use for generator to make electricity |
Waste gas | Recycled to furnace for heating reactor |
Slag | Put it into the furnace for heating reactor |
Wastes = Wealth! Chick to get your local profit analysis!